Product specification sheet

SAG-M85C

SAG-M85C Sodium Polyacrylate Containing Fluff Pulp

This grade of sodium polyacrylate is the material that comes out of

  • The cleaning process of the reclaimed super-absorbent polymer put in place by Recyc PHP that recycles incontinence briefs and baby diapers
  • Cleaning process of equipment
  • Cleaning process of facilities

Since this material is the result of the last phase of cleaning process, the specifications are for information only.

This grade of sodium polyacrylate can be used in applications that are not required highly technical specifications, as the used water management.

Recyc PHP

Specifications of Sodium Polyacrylate Containing Fluff Pulp

Distilled water absorption capacity: About 200 g/g
Absorption solution of 0,9 % NaCl under 0,3 psi pressure: Not measured for this grade
Absorption solution of 0,9 % NaCl under 0,7 psi pressure: Not measured for this grade
Absorption capacity of water containing 0,9 % NaCl: Not measured for this grade
Absorption after passing through the centrifuge: Not measured for this grade
Moisture: Not measured for this grade
Bulk density: 400 kg/m³

Impurities: 5 to 25 % of fluff pulp and can contain pieces of plastic films
Odor: Normally odorless can contain baby powder perfume

Specifications of virgin material
pH: 4,9 – 6,5
Insoluble, swelling effect (20oC)
Fusion point > 390oF. No fire hazards are associated with sodium polyacrylate.
Sodium polyacrylate is not classified as a hazardous product under transportation regulations (ADR RID ADNR IMGD/GGV see ICAO/IATA).

HS Classification code of the sodium polyacrylate: 3906-90-5000

Shipping information

FTL or LTL. Sold in super bags of 600 to 800 kg.

Our factory is well located at 100 km from Montreal Port.